Hydraulic Motor replacement for Danfoss BMR/OMR series 25/50/63/80/100/125/160/200/250/315/400cc,2-Bolt Mounting Flange ,G1/2 NPT Ports

* Shaft diameter 25mm; parallel key 8mm ;G1/4 Drain Port Thread ; 82.5mm Mounting Flange;
*Double needle bearing can bear higher radial force,with more Concentricity that can help smooth running under the high speed condition;
*Shaft seal can bear high pressure of back and the motot can be used in parallel or in series;
*High quality oil seal lead to longer service life;
*Special design in the driver-linker and prolong operating life;
*Special design for distribution system can meet the requirement of low noise of unit;
*Hydraulic applications :Construction Machinery , Agriculture Machinery ,Heavy-Duty Equipment ,Forestry Machinery ,Mining Equipment.
*Product MOQ100 PCS/Order.

Inquiry

Write a Review

Thanks to the good comments from our long-term partners, has attracted more attention in the world.

Hydraulic Motor replacement for Danfoss BMR/OMR series Video

Hydraulic Orbital Motor BM2/BMR/OMR

The BM2/BMR/OMR series hydraulic orbital motor produced by Fei Yue is a small volume, economic type axial flow hydraulic motor.

Due to its small size, compact structure, high efficiency, and economical reliability,the BM2/BMR/OMR series orbital hydraulic motors are widely applied in agriculture machinery, plastic industry, mining,fishing machinery, and construction machinery, especially fitted to lower load applications, such as plastic injection mold machine, cleaner, grass cutter,Winches,Conveyors,Slews,Sweeper Drives,Augers,Cutters,Mowers ,Chippers and Truck Mounted Pumps.

Hydraulic Motor replacement for Danfoss BMR/OMR series 25/50/63/80/100/125/160/200/250/315/400cc,2-Bolt Mounting Flange ,G1/2 NPT Ports 2

Ordering Information

Product NO

Displacement
(CCM)

Mounting Flange
(MM)

Shaft
(MM)

Port Size

Drain Port

Shaft end

thread

Mounting
holes

Oil Port
shape

Parallel key
width（MM）

BMR/OMR

25/50/63/80/100/125/

160/200/250/315/400

82.5

G1/2

G1/4

Main Specification

TYPE		BM2	BM2	BM2	BM2	BM2	BM2	BM2	BM2	BM2	BM2
TYPE		OMR	OMR	OMR	OMR	OMR	OMR	OMR	OMR	OMR	OMR
Displacement(ml/r)		50	63	80	100	125	160	200	250	315	400
Flow (LPM)	Continuous	40	40	60	60	60	60	60	60	60	60
Flow (LPM)	Intermittent	50	50	75	75	75	75	75	75	75	75
Speed (RPM)	Continuous	755	630	750	600	475	375	300	240	190	160
Speed (RPM)	Intermittent	970	790	940	750	600	470	375	300	240	200
Pressure (MPA)	Continuous	14	14	17.5	17.5	17.5	16.5	13	11	8.5	8.5
Pressure (MPA)	Intermittent	17.5	17.5	20	20	20	20	17.5	14	11.5	11.5
Torque (N*.m)	Continuous	100	124	190	240	292	363	358	352	360	420
Torque (N*.m)	Intermittent	126	156	220	280	340	430	448	470	470	548
1.Continuous pressure:Max.value of operating motor continuously. 2.Intermittent pressure:Max.value of operating motor in 6 seconds per minute . 3.Peak pressure:Max.value of operating motor in 0.6 second per minute. 4.The optimum operating situation should be at the 1/3-2/3 of the continuous operating situation.

Replace DANFOSS No.

151F-0500	151F-0522	151F-2206	151F-2242	151F-2305	151F-2327	151F-2354
151F-0501	151F-0523	151F-2207	151F-2243	151F-2306	151F-2328	151F-2355
151F-0502	151F-0524	151F-2208	151F-2244	151F-2307	151F-2329	151F-2356
151F-0503	151F-0525	151F-2209	151F-2245	151F-2308	151F-2330	151F-2357
151F-0504	151F-0526	151F-2210	151F-2246	151F-2309	151F-2331	151F-2358

Replaceable Orbital Motors Cross Reference Table

FY	DANFOSS	M+S	EATON	ROSS	WHITE	PARKER	SAM	BOSCH
HYDRAULIC	DANFOSS	HYDRAULIC	CHAR LYNN	TRW	CROSS	PARKER	BREVINI	RECROTH
BMM	OMM	MM MLHK	J SERIES				BGM	MGX
BM1/BMP	OMP DH	MP HP	H SERIES	MF MG	WP RS	TC TE TB	BG	MGP GXP
BM2/BMR	OMR DS OMEW	MR HR MLHRW,RW	S,T SERIES W SERIES	MB	WR RE	TF	BR	MGR GMR
BM4/BMH	OMH	MH MLHH HW HWF		ME	RE	TG
BM5/BMS	OMS	MS MSY MLHS	2000 SERIES	ME	RE	TG	HPR	MGS GMS
BM6/BMT	OMT TMT	MT MLHT MTM	6000 SERIES	MJ			HT	MGT,GMT
BMV	OMV	MV MLHV	10000 SERIES					MGV GMV

Usage Guide:

1.OMR Series motors are designed as low speed high torque and low weight type motors.

2.A simultaneous max,speed and max.pressure is not recommended.

3.Can be used in parallel or in series.Case drain line is necessary when back pressure is over 5 Mpa.

4.The optimum operating situation should be at the 1/3-2/3 of the continuous operating situation.

5.Make sure the motor is always filled with oil before operating.

6.Max.operating temperature:80℃.

7.Recommended fluid:Anti-wear type of hydraulic oil.Viscosity recommended 37-73cst.Filtration:ISO19/16.

Hydraulic Motor replacement for Danfoss BMR/OMR series 25/50/63/80/100/125/160/200/250/315/400cc,2-Bolt Mounting Flange ,G1/2 NPT Ports 3

Notes:

The products you buy from us with 12 months quality warrenty,during the guarantee period we will replace products free of charge or refund your money in full.

Hydraulic Motor replacement for Danfoss BMR/OMR series 25/50/63/80/100/125/160/200/250/315/400cc,2-Bolt Mounting Flange ,G1/2 NPT Ports 4

The product is trustworthy and believed to has a wider application in the future.